| FIREPRO | AUSTRALIA |
| DAMPERS & GRILLS Firepro FD40R Fire Dampers are installed with ducting systems where they pass through fire rated walls and floors. In normal conditions the damper allows air-flow through the duct. When a fire occurs the intumescent material within the damper swells rapidly to form a non-combustible, insulating fire stopping barrier. Firepro FD40R Fire Dampers consist of a circular steel tube (spigot) with a circular grill inside. The grill contains the intumescent material. The damper comes complete with fixing brackets for the most common method of application. The circular steel spigot is galvanised steel with a length of 350mm. Spigot diameters are 100mm, 125mm, 150mm, 200mm, 250mm, 300mm. All measurements are nominal. View or Download the FD40R Datasheet (pdf) |
![]() | |||||||||||||||||||
| Firepro FG10 Grills are designed to provide maximum free air area (83% excluding Stainless Steel case) whilst closing rapidly in a fire.
In normal operation air flows freely through the core.
When a fire occurs the core swells to many time its original volume (intumesce), blocking air flow, smoke, hot gases and fire.
The FG10 Grill intumescent sheet is also used by fire door manufacturers. Grills used in concrete masonry, brick and plasterboard walls, achieve 2 hours fire integrity with closure within 90 seconds in sizes up to 300mm x 300mm. View or Download the FG10 Datasheet (pdf) |
![]() | |||||||||||||||||||
Firepro FG50 Intumescent Grills allow the bi-directional movement of air through fire rated walls and floors.
When a fire occurs the slats in the grill intumesce (swell to many times their original size) very rapidly to form a solid fire barrier.
They are simple to install, easy to identify, and economical.
Firepro FG50 Intumescent Grills have slats of foil-covered intumescent material with a rigid steel frame.
View or Download the FG50 Datasheet (pdf) |
![]() | |||||||||||||||||||